Flat Roofs: TPO and EPDM
Colorado Springs, CO
Heat-welded TPO and EPDM rubber membrane systems for flat and low-slope residential and commercial roofs. Watertight, energy-efficient, backed by a 20-year manufacturer warranty.
The Right Flat Roofing System for Colorado's Climate
Flat and low-slope roofs are their own discipline. They succeed or fail on two things: drainage, and the quality of the membrane seams. That is why we spec heat-welded TPO and fully-adhered EPDM systems detailed for the freeze-thaw swings, heavy spring snow load, and hail that Colorado Springs roofs take every year. Here is what goes into a flat roof we are willing to warranty.
Heat-Welded Seams
TPO membrane seams are heat-welded together using hot air tools, creating a watertight bond as strong as the membrane itself. There are no adhesives that can fail in cold weather and no exposed seams that can separate under UV. The welded seam is the critical advantage of TPO over older flat roofing systems.
White Reflective Surface
TPO's white surface reflects solar radiation rather than absorbing it. In Colorado's high-altitude sun, this reduces rooftop temperatures significantly, lowering cooling loads and extending membrane life by reducing thermal cycling stress.
20-Year Manufacturer Warranty
Every Fixins TPO installation is backed by a 20-year manufacturer warranty on the membrane material. This warranty covers manufacturing defects and, depending on the specific product selected, may include coverage for hail damage as well.
Low-Slope Residential Applications
Many Colorado Springs homes have sections of low-slope roofing over additions, garages, or porches that cannot accommodate steep-slope shingle or tile systems. TPO is the correct specification for these areas. Applying shingles to a low-slope section is a common mistake that causes chronic leaking.
Positive Drainage by Design
A flat roof is only as good as its slope to the drains. We build tapered insulation under the membrane to move water toward drains and scuppers instead of letting it pond. Ponding water is the single biggest cause of early flat-roof failure on the Front Range, and it is exactly what heavy spring snowmelt creates on a roof that was never sloped correctly.
Documented for Your Insurance
When a flat or low-slope roof is being replaced after a storm, we photograph and document the full scope the way an adjuster needs to see it. You get the same insurance advocacy on a commercial or low-slope project that we bring to every residential claim, so the covered work gets paid for and nothing legitimate is missed.
Financing Through Hearth
0% interest plans available. Approval for credit scores starting at 540. No prepayment penalty. Senior and Military discounts available on every Fixins project.
TPO and EPDM Flat and Low-Slope Systems
Flat and low-slope roofs demand a fully different approach than pitched roofs. Fixins installs both heat-welded TPO and fully-adhered EPDM rubber membrane systems, matched to your building, budget, and long-term goals.
- Heat-welded seams that are stronger than the membrane itself
- Reflective white surface that cuts cooling costs dramatically
- EPDM rubber membranes rated for ponding and extreme temperature swings
- Ideal for commercial buildings and modern flat-roof homes
- Backed by manufacturer warranties up to 20 years
Two Proven Flat Roof Systems
Think of it like this: TPO is the cool roof, EPDM is the tough roof. Both are excellent flat roofing systems. The best choice depends on your building, budget, and long-term goals.
TPO Reflects the Sun
TPO (Thermoplastic Polyolefin) is a white reflective roofing membrane that helps reduce roof surface temperatures and improve energy efficiency during hot Colorado summers. It is one of the most popular choices for commercial buildings because it is durable, heat-welded for watertight seams, and low maintenance.
EPDM Is Basically a Giant Rubber Roof
EPDM (Ethylene Propylene Diene Monomer) is a synthetic rubber roofing membrane that has been protecting buildings for over 50 years. Its flexibility makes it an excellent choice for handling Colorado's freezing winters, hail, and dramatic temperature swings, and it is rated for ponding water.
Yes, TPO and EPDM Work on Homes Too
You can absolutely re-roof a residential home with TPO or EPDM. This Colorado Springs home had aging rolled roofing that was ready to fail. Fixins replaced it with a clean heat-welded TPO membrane built for decades of Front Range sun, snow, and hail.
Our Flat Roof Method
Assess Drainage
We map every low spot and design positive slope to eliminate ponding water.
Prep the Deck
The substrate is cleaned, dried, and insulated to manufacturer specification.
Heat-Weld Membrane
TPO sheets are robotically hot-air welded into one continuous surface. EPDM membranes are fully adhered with taped seams.
Seal Penetrations
Every vent, drain, and curb is flashed and welded for a leak-free system.
Why TPO and EPDM for Colorado
Reflective and Cool
The bright white surface reflects Colorado sun, lowering interior temperatures.
Fully Waterproof
Heat-welded TPO seams and fully-adhered EPDM sheets create one continuous membrane with no weak joints.
20-Year Warranties
Manufacturer-backed coverage when installed by a certified contractor like Fixins.
Frequently Asked Questions
We install both TPO and EPDM. Heat-welded TPO reflects sun and cuts cooling costs, while EPDM rubber excels in freezing winters, hail, and big temperature swings. We match the system to your building, budget, and goals.
TPO is a white reflective membrane that keeps buildings cooler and improves energy efficiency. EPDM is a synthetic rubber membrane trusted for over 50 years, prized for flexibility through extreme temperature swings and rated for ponding water. Both are excellent flat roof systems.
Yes. Homes with flat or low-slope sections are great candidates for TPO or EPDM. One recent Colorado Springs project replaced old rolled roofing with a clean heat-welded TPO membrane.
A properly installed TPO system typically lasts 20 to 30 years, and EPDM has a similar or longer track record. Membrane thickness, insulation, and flashing detail make the difference, which is why installation quality matters.
Yes. We correct drainage with tapered insulation, added drains, or scuppers as part of a re-roof so water moves off the membrane instead of sitting on it.
Yes. We install and repair TPO and EPDM for commercial and multi-family buildings, with staging and scheduling planned around your tenants and operations.
Need a Flat Roof Solution?
Free inspection and honest assessment of your flat or low-slope roofing needs.